MakeItFrom.com
Menu (ESC)

AWS BAg-19 vs. 2014A Aluminum

AWS BAg-19 belongs to the otherwise unclassified metals classification, while 2014A aluminum belongs to the aluminum alloys. There are 15 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AWS BAg-19 and the bottom bar is 2014A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 74
72
Poisson's Ratio 0.37
0.33
Shear Modulus, GPa 27
27
Tensile Strength: Ultimate (UTS), MPa 140
210 to 490

Thermal Properties

Latent Heat of Fusion, J/g 120
400
Melting Completion (Liquidus), °C 890
640
Melting Onset (Solidus), °C 760
510
Specific Heat Capacity, J/kg-K 250
870
Thermal Expansion, µm/m-K 20
23

Otherwise Unclassified Properties

Density, g/cm3 10
3.0

Common Calculations

Stiffness to Weight: Axial, points 4.0
13
Stiffness to Weight: Bending, points 14
46
Strength to Weight: Axial, points 3.8
19 to 45
Strength to Weight: Bending, points 5.8
26 to 46
Thermal Shock Resistance, points 6.9
9.0 to 22

Alloy Composition

Aluminum (Al), % 0
90.8 to 95
Chromium (Cr), % 0
0 to 0.1
Copper (Cu), % 6.6 to 7.9
3.9 to 5.0
Iron (Fe), % 0
0 to 0.5
Lithium (Li), % 0.15 to 0.3
0
Magnesium (Mg), % 0
0.2 to 0.8
Manganese (Mn), % 0
0.4 to 1.2
Nickel (Ni), % 0
0 to 0.1
Silicon (Si), % 0
0.5 to 0.9
Silver (Ag), % 92 to 93
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15