MakeItFrom.com
Menu (ESC)

AZ31B-O Magnesium vs. Annealed 85-platinum 15-iridium

AZ31B-O magnesium belongs to the magnesium alloys classification, while annealed 85-platinum 15-iridium belongs to the otherwise unclassified metals. There are 19 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ31B-O magnesium and the bottom bar is annealed 85-platinum 15-iridium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
220
Elongation at Break, % 12
34
Poisson's Ratio 0.29
0.38
Shear Modulus, GPa 17
81
Shear Strength, MPa 140
370
Tensile Strength: Ultimate (UTS), MPa 240
560

Thermal Properties

Latent Heat of Fusion, J/g 350
110
Melting Completion (Liquidus), °C 600
1820
Melting Onset (Solidus), °C 600
1790
Specific Heat Capacity, J/kg-K 990
130
Thermal Expansion, µm/m-K 26
8.4

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 18
6.2
Electrical Conductivity: Equal Weight (Specific), % IACS 95
2.6

Otherwise Unclassified Properties

Density, g/cm3 1.7
22

Common Calculations

Stiffness to Weight: Axial, points 15
5.7
Stiffness to Weight: Bending, points 70
9.3
Strength to Weight: Axial, points 39
7.1
Strength to Weight: Bending, points 50
6.9
Thermal Shock Resistance, points 14
21

Alloy Composition

Aluminum (Al), % 2.4 to 3.6
0
Calcium (Ca), % 0 to 0.040
0
Copper (Cu), % 0 to 0.050
0
Iridium (Ir), % 0
14.5 to 15.5
Iron (Fe), % 0 to 0.050
0
Magnesium (Mg), % 93.6 to 97.1
0
Manganese (Mn), % 0.050 to 1.0
0
Nickel (Ni), % 0 to 0.0050
0
Platinum (Pt), % 0
84.3 to 85.5
Silicon (Si), % 0 to 0.1
0
Zinc (Zn), % 0.5 to 1.5
0
Residuals, % 0
0 to 0.2