MakeItFrom.com
Menu (ESC)

AZ31C Magnesium vs. C74000 Nickel Silver

AZ31C magnesium belongs to the magnesium alloys classification, while C74000 nickel silver belongs to the copper alloys. There are 22 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ31C magnesium and the bottom bar is C74000 nickel silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
120
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 17
44
Tensile Strength: Ultimate (UTS), MPa 260
380 to 590

Thermal Properties

Latent Heat of Fusion, J/g 350
200
Maximum Temperature: Mechanical, °C 110
180
Melting Completion (Liquidus), °C 600
990
Melting Onset (Solidus), °C 550
950
Specific Heat Capacity, J/kg-K 990
390
Thermal Expansion, µm/m-K 26
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 19
40
Electrical Conductivity: Equal Weight (Specific), % IACS 98
42

Otherwise Unclassified Properties

Base Metal Price, % relative 12
30
Density, g/cm3 1.7
8.5
Embodied Carbon, kg CO2/kg material 23
3.4
Embodied Energy, MJ/kg 160
54
Embodied Water, L/kg 970
310

Common Calculations

Stiffness to Weight: Axial, points 15
7.7
Stiffness to Weight: Bending, points 70
19
Strength to Weight: Axial, points 42
13 to 19
Strength to Weight: Bending, points 53
14 to 18
Thermal Shock Resistance, points 16
13 to 19

Alloy Composition

Aluminum (Al), % 2.4 to 3.6
0
Copper (Cu), % 0 to 0.1
69 to 73.5
Iron (Fe), % 0
0 to 0.25
Lead (Pb), % 0
0 to 0.1
Magnesium (Mg), % 93.4 to 97
0
Manganese (Mn), % 0.15 to 1.0
0 to 0.5
Nickel (Ni), % 0 to 0.030
9.0 to 11
Silicon (Si), % 0 to 0.1
0
Zinc (Zn), % 0.5 to 1.5
14.2 to 22
Residuals, % 0
0 to 0.5