POM-C vs. EPDM Rubber
POM-C belongs to the thermoplastics classification, while EPDM rubber belongs to the thermoset elastomers (rubber). There are 6 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is POM-C and the bottom bar is EPDM rubber.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.6 | |
| 1.0 |
| Elongation at Break, % | 3.0 to 65 | |
| 400 |
| Specific Heat Capacity, J/kg-K | 1130 to 1370 | |
| 2000 |
| Strength to Weight: Axial, points | 12 to 19 | |
| 3.6 |
| Strength to Weight: Bending, points | 24 to 32 | |
| 12 |
| Tensile Strength: Ultimate (UTS), MPa | 61 to 110 | |
| 13 |