POM-H vs. EMA
Both POM-H and EMA are thermoplastics. There are 5 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown.
For each property being compared, the top bar is POM-H and the bottom bar is EMA.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.6 | |
| 0.94 |
| Elongation at Break, % | 7.0 to 55 | |
| 800 |
| Strength to Weight: Axial, points | 11 to 13 | |
| 2.4 |
| Strength to Weight: Bending, points | 22 to 26 | |
| 9.5 |
| Tensile Strength: Ultimate (UTS), MPa | 60 to 67 | |
| 8.0 |