ASA vs. PEEK
Both ASA and PEEK are thermoplastics. There are 15 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is ASA and the bottom bar is PEEK.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 2.6 | |
| 4.0 to 24 |
| Elongation at Break, % | 6.0 | |
| 1.6 to 43 |
| Tensile Strength: Ultimate (UTS), MPa | 55 | |
| 97 to 200 |
Thermal Properties
| Glass Transition Temperature, °C | 100 | |
| 240 |
| Specific Heat Capacity, J/kg-K | 1300 | |
| 1390 to 1700 |
| Thermal Conductivity, W/m-K | 0.18 | |
| 0.25 to 0.93 |
| Thermal Expansion, µm/m-K | 95 | |
| 15 to 52 |
Electrical Properties
| Electrical Resistivity Order of Magnitude, 10x Ω-m | 13 | |
| 3.0 to 14 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.1 | |
| 1.3 to 1.5 |
Common Calculations
| Stiffness to Weight: Axial, points | 1.3 | |
| 1.5 to 10 |
| Stiffness to Weight: Bending, points | 43 | |
| 36 to 73 |
| Strength to Weight: Axial, points | 14 | |
| 20 to 41 |
| Strength to Weight: Bending, points | 30 | |
| 36 to 55 |
| Thermal Diffusivity, mm2/s | 0.13 | |
| 0.1 to 0.51 |
| Thermal Shock Resistance, points | 16 | |
| 34 to 57 |