MakeItFrom.com
Menu (ESC)

Annealed 70Ag-30Ni Alloy vs. AZ31B-O Magnesium

Annealed 70Ag-30Ni alloy belongs to the otherwise unclassified metals classification, while AZ31B-O magnesium belongs to the magnesium alloys. There are 17 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is annealed 70Ag-30Ni alloy and the bottom bar is AZ31B-O magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
45
Poisson's Ratio 0.35
0.29
Shear Modulus, GPa 39
17
Tensile Strength: Ultimate (UTS), MPa 320
240

Thermal Properties

Latent Heat of Fusion, J/g 170
350
Melting Completion (Liquidus), °C 960
600
Melting Onset (Solidus), °C 960
600
Specific Heat Capacity, J/kg-K 300
990
Thermal Expansion, µm/m-K 17
26

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 69
18
Electrical Conductivity: Equal Weight (Specific), % IACS 62
95

Otherwise Unclassified Properties

Density, g/cm3 10
1.7

Common Calculations

Stiffness to Weight: Axial, points 5.8
15
Stiffness to Weight: Bending, points 16
70
Strength to Weight: Axial, points 8.8
39
Strength to Weight: Bending, points 10
50
Thermal Shock Resistance, points 13
14

Alloy Composition

Aluminum (Al), % 0
2.4 to 3.6
Calcium (Ca), % 0
0 to 0.040
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 0
0 to 0.050
Magnesium (Mg), % 0
93.6 to 97.1
Manganese (Mn), % 0
0.050 to 1.0
Nickel (Ni), % 28.8 to 31
0 to 0.0050
Silicon (Si), % 0
0 to 0.1
Silver (Ag), % 69 to 71
0
Zinc (Zn), % 0
0.5 to 1.5
Residuals, % 0
0 to 0.3