Automotive Grey Cast Iron vs. ASTM B477 Au-Ni-Ag
Automotive grey cast iron belongs to the iron alloys classification, while ASTM B477 Au-Ni-Ag belongs to the otherwise unclassified metals. There are 18 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is automotive grey cast iron and the bottom bar is ASTM B477 Au-Ni-Ag.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 180 | |
| 95 |
| Elongation at Break, % | 9.6 to 14 | |
| 5.5 to 11 |
| Poisson's Ratio | 0.29 | |
| 0.41 |
| Shear Modulus, GPa | 69 to 70 | |
| 34 |
| Tensile Strength: Ultimate (UTS), MPa | 140 to 290 | |
| 310 to 550 |
Thermal Properties
| Latent Heat of Fusion, J/g | 260 to 280 | |
| 80 |
| Melting Completion (Liquidus), °C | 1380 to 1390 | |
| 1010 |
| Melting Onset (Solidus), °C | 1340 to 1350 | |
| 930 |
| Specific Heat Capacity, J/kg-K | 490 | |
| 160 |
| Thermal Expansion, µm/m-K | 12 to 14 | |
| 15 |
Electrical Properties
| Electrical Conductivity: Equal Volume, % IACS | 7.4 to 7.6 | |
| 14 |
| Electrical Conductivity: Equal Weight (Specific), % IACS | 8.8 to 9.1 | |
| 7.5 |
Otherwise Unclassified Properties
| Density, g/cm3 | 7.5 to 7.6 | |
| 17 |
Common Calculations
| Stiffness to Weight: Axial, points | 13 | |
| 3.1 |
| Stiffness to Weight: Bending, points | 25 | |
| 8.9 |
| Strength to Weight: Axial, points | 5.2 to 11 | |
| 5.0 to 9.0 |
| Strength to Weight: Bending, points | 8.0 to 13 | |
| 6.0 to 8.8 |
| Thermal Shock Resistance, points | 4.2 to 8.6 | |
| 16 to 28 |