CAB vs. Epoxy
CAB belongs to the thermoplastics classification, while epoxy belongs to the thermoset plastics. There are 14 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is CAB and the bottom bar is epoxy.
Metric UnitsUS Customary Units
Mechanical Properties
Elongation at Break, % | 50 to 55 | |
4.5 |
Tensile Strength: Ultimate (UTS), MPa | 20 to 50 | |
67 |
Thermal Properties
Glass Transition Temperature, °C | 140 | |
120 |
Specific Heat Capacity, J/kg-K | 1460 | |
1500 |
Thermal Conductivity, W/m-K | 0.25 | |
0.2 |
Thermal Expansion, µm/m-K | 14 | |
100 |
Electrical Properties
Dielectric Strength (Breakdown Potential), kV/mm | 15 | |
16 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 16 | |
13 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.2 | |
1.3 |
Limiting Oxygen Index (LOI), % | 18 | |
20 |
Refractive Index | 1.5 | |
1.6 |
Common Calculations
Strength to Weight: Axial, points | 4.8 to 12 | |
14 |
Strength to Weight: Bending, points | 14 to 25 | |
28 |
Thermal Diffusivity, mm2/s | 0.14 to 0.15 | |
0.1 |