CAP vs. UP
CAP belongs to the thermoplastics classification, while UP belongs to the thermoset plastics. There are 10 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is CAP and the bottom bar is UP.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.2 | |
| 2.0 |
| Elongation at Break, % | 35 to 50 | |
| 1.0 |
| Glass Transition Temperature, °C | 190 | |
| 60 |
| Specific Heat Capacity, J/kg-K | 1480 | |
| 1200 |
| Strength to Weight: Axial, points | 6.5 to 10 | |
| 4.2 |
| Strength to Weight: Bending, points | 17 to 23 | |
| 11 |
| Tensile Strength: Ultimate (UTS), MPa | 28 to 45 | |
| 30 |
| Thermal Conductivity, W/m-K | 0.25 | |
| 0.7 |
| Thermal Diffusivity, mm2/s | 0.14 | |
| 0.29 |
| Thermal Expansion, µm/m-K | 14 | |
| 3.0 |