Class 1 Tungsten vs. Commercially Pure Palladium
Both class 1 tungsten and commercially pure palladium are otherwise unclassified metals. There are 16 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is class 1 tungsten and the bottom bar is commercially pure palladium.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 250 | |
120 |
Elongation at Break, % | 5.7 | |
1.1 to 11 |
Poisson's Ratio | 0.29 | |
0.39 |
Shear Modulus, GPa | 98 | |
43 |
Tensile Strength: Ultimate (UTS), MPa | 860 | |
200 to 380 |
Thermal Properties
Latent Heat of Fusion, J/g | 160 | |
160 |
Specific Heat Capacity, J/kg-K | 120 | |
240 |
Thermal Expansion, µm/m-K | 5.1 | |
12 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 12 | |
16 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 7.4 | |
12 |
Otherwise Unclassified Properties
Density, g/cm3 | 15 | |
12 |
Common Calculations
Stiffness to Weight: Axial, points | 9.6 | |
5.6 |
Stiffness to Weight: Bending, points | 14 | |
14 |
Strength to Weight: Axial, points | 16 | |
4.5 to 8.8 |
Strength to Weight: Bending, points | 14 | |
6.2 to 9.7 |
Thermal Shock Resistance, points | 48 | |
9.8 to 19 |
Alloy Composition
Palladium (Pd), % | 0 | |
99.8 to 100 |
Tungsten (W), % | 90 | |
0 |
Residuals, % | 0 | |
0 to 0.2 |