Class 3 Tungsten vs. Austempered Cast Iron
Class 3 tungsten belongs to the otherwise unclassified metals classification, while austempered cast iron belongs to the iron alloys. There are 22 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown.
For each property being compared, the top bar is class 3 tungsten and the bottom bar is austempered cast iron.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 270 | |
180 |
Elongation at Break, % | 3.4 | |
1.1 to 13 |
Poisson's Ratio | 0.28 | |
0.29 |
Shear Modulus, GPa | 100 | |
62 to 69 |
Tensile Strength: Ultimate (UTS), MPa | 830 | |
860 to 1800 |
Tensile Strength: Yield (Proof), MPa | 580 | |
560 to 1460 |
Thermal Properties
Latent Heat of Fusion, J/g | 170 | |
280 |
Specific Heat Capacity, J/kg-K | 120 | |
490 |
Thermal Conductivity, W/m-K | 30 | |
42 |
Thermal Expansion, µm/m-K | 4.5 | |
13 |
Otherwise Unclassified Properties
Density, g/cm3 | 15 | |
7.5 |
Embodied Carbon, kg CO2/kg material | 23 | |
1.8 |
Embodied Energy, MJ/kg | 360 | |
25 |
Embodied Water, L/kg | 150 | |
48 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 25 | |
19 to 95 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 630 | |
880 to 3970 |
Stiffness to Weight: Axial, points | 9.6 | |
13 |
Stiffness to Weight: Bending, points | 14 | |
25 |
Strength to Weight: Axial, points | 15 | |
32 to 66 |
Strength to Weight: Bending, points | 13 | |
27 to 44 |
Thermal Diffusivity, mm2/s | 15 | |
11 |
Thermal Shock Resistance, points | 49 | |
25 to 53 |
Alloy Composition
Aluminum (Al), % | 0 | |
0 to 0.050 |
Arsenic (As), % | 0 | |
0 to 0.020 |
Carbon (C), % | 0 | |
3.4 to 3.8 |
Chromium (Cr), % | 0 | |
0 to 0.1 |
Copper (Cu), % | 0 | |
0 to 0.8 |
Iron (Fe), % | 0 | |
89.6 to 94 |
Magnesium (Mg), % | 0 | |
0 to 0.040 |
Manganese (Mn), % | 0 | |
0.3 to 0.4 |
Molybdenum (Mo), % | 0 | |
0 to 0.3 |
Nickel (Ni), % | 0 | |
0 to 2.0 |
Phosphorus (P), % | 0 | |
0 to 0.040 |
Selenium (Se), % | 0 | |
0 to 0.030 |
Silicon (Si), % | 0 | |
2.3 to 2.7 |
Sulfur (S), % | 0 | |
0 to 0.020 |
Tin (Sn), % | 0 | |
0 to 0.020 |
Tungsten (W), % | 95 | |
0 |
Vanadium (V), % | 0 | |
0 to 0.1 |
Residuals, % | 5.0 | |
0 |