DAP vs. EEA
DAP belongs to the thermoset plastics classification, while EEA belongs to the thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is DAP and the bottom bar is EEA.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.7 | |
| 0.93 |
| Dielectric Constant (Relative Permittivity) At 1 Hz | 5.2 | |
| 2.7 |
| Dielectric Strength (Breakdown Potential), kV/mm | 40 | |
| 22 |
| Elastic (Young's, Tensile) Modulus, GPa | 13 | |
| 0.035 |
| Stiffness to Weight: Axial, points | 4.1 | |
| 0.021 |
| Stiffness to Weight: Bending, points | 46 | |
| 12 |
| Strength to Weight: Axial, points | 4.5 | |
| 4.2 |
| Strength to Weight: Bending, points | 12 | |
| 14 |
| Tensile Strength: Ultimate (UTS), MPa | 28 | |
| 14 |