DAP vs. HDPE
DAP belongs to the thermoset plastics classification, while HDPE belongs to the thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is DAP and the bottom bar is HDPE.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.7 | |
| 1.0 to 1.3 |
| Elongation at Break, % | 31 | |
| 2.5 to 100 |
| Impact Strength: Notched Izod, J/m | 14 | |
| 50 to 260 |
| Specific Heat Capacity, J/kg-K | 1450 | |
| 1330 to 2400 |
| Strength to Weight: Axial, points | 4.5 | |
| 6.9 to 17 |
| Strength to Weight: Bending, points | 12 | |
| 19 to 32 |
| Tensile Strength: Ultimate (UTS), MPa | 28 | |
| 24 to 80 |