DAP vs. PA 6/12
DAP belongs to the thermoset plastics classification, while PA 6/12 belongs to the thermoplastics. There are 13 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown.
For each property being compared, the top bar is DAP and the bottom bar is PA 6/12.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 13 | |
| 1.7 to 2.2 |
| Elongation at Break, % | 31 | |
| 30 to 120 |
| Flexural Strength, MPa | 62 | |
| 45 to 64 |
| Tensile Strength: Ultimate (UTS), MPa | 28 | |
| 40 to 58 |
Thermal Properties
| Specific Heat Capacity, J/kg-K | 1450 | |
| 1590 |
| Thermal Conductivity, W/m-K | 0.6 | |
| 0.22 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 5.2 | |
| 3.9 to 12 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.7 | |
| 1.1 |
Common Calculations
| Stiffness to Weight: Axial, points | 4.1 | |
| 0.89 to 1.2 |
| Stiffness to Weight: Bending, points | 46 | |
| 38 to 41 |
| Strength to Weight: Axial, points | 4.5 | |
| 10 to 15 |
| Strength to Weight: Bending, points | 12 | |
| 25 to 31 |
| Thermal Diffusivity, mm2/s | 0.24 | |
| 0.13 |