DAP vs. PTMT
DAP belongs to the thermoset plastics classification, while PTMT belongs to the thermoplastics. There are 8 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is DAP and the bottom bar is PTMT.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 1.7 | |
1.3 |
Dielectric Constant (Relative Permittivity) At 1 Hz | 5.2 | |
3.2 |
Dielectric Strength (Breakdown Potential), kV/mm | 40 | |
17 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 160 | |
50 |
Impact Strength: Notched Izod, J/m | 14 | |
53 |
Strength to Weight: Axial, points | 4.5 | |
12 |
Strength to Weight: Bending, points | 12 | |
25 |
Tensile Strength: Ultimate (UTS), MPa | 28 | |
56 |