MakeItFrom.com
Menu (ESC)

EN 1.0070 Steel vs. 7475 Aluminum

EN 1.0070 steel belongs to the iron alloys classification, while 7475 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.0070 steel and the bottom bar is 7475 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 9.1
10 to 12
Fatigue Strength, MPa 210
190 to 210
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 73
26
Shear Strength, MPa 440
320 to 350
Tensile Strength: Ultimate (UTS), MPa 740
530 to 590
Tensile Strength: Yield (Proof), MPa 350
440 to 520

Thermal Properties

Latent Heat of Fusion, J/g 250
380
Maximum Temperature: Mechanical, °C 400
180
Melting Completion (Liquidus), °C 1470
640
Melting Onset (Solidus), °C 1430
480
Specific Heat Capacity, J/kg-K 470
870
Thermal Conductivity, W/m-K 53
140 to 160
Thermal Expansion, µm/m-K 12
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 6.8
33 to 42
Electrical Conductivity: Equal Weight (Specific), % IACS 7.8
98 to 120

Otherwise Unclassified Properties

Base Metal Price, % relative 1.7
10
Density, g/cm3 7.9
3.0
Embodied Carbon, kg CO2/kg material 1.4
8.2
Embodied Energy, MJ/kg 18
150
Embodied Water, L/kg 45
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 56
53 to 68
Resilience: Unit (Modulus of Resilience), kJ/m3 320
1390 to 1920
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
46
Strength to Weight: Axial, points 26
49 to 55
Strength to Weight: Bending, points 23
48 to 52
Thermal Diffusivity, mm2/s 14
53 to 63
Thermal Shock Resistance, points 23
23 to 26

Alloy Composition

Aluminum (Al), % 0
88.6 to 91.6
Chromium (Cr), % 0
0.18 to 0.25
Copper (Cu), % 0
1.2 to 1.9
Iron (Fe), % 99.876 to 100
0 to 0.12
Magnesium (Mg), % 0
1.9 to 2.6
Manganese (Mn), % 0
0 to 0.060
Nitrogen (N), % 0 to 0.014
0
Phosphorus (P), % 0 to 0.055
0
Silicon (Si), % 0
0 to 0.1
Sulfur (S), % 0 to 0.055
0
Titanium (Ti), % 0
0 to 0.060
Zinc (Zn), % 0
5.1 to 6.2
Residuals, % 0
0 to 0.15