MakeItFrom.com
Menu (ESC)

EN 1.0449 Cast Steel vs. 7049 Aluminum

EN 1.0449 cast steel belongs to the iron alloys classification, while 7049 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.0449 cast steel and the bottom bar is 7049 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 28
6.2 to 7.0
Fatigue Strength, MPa 170
160 to 170
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 73
27
Tensile Strength: Ultimate (UTS), MPa 460
510 to 530
Tensile Strength: Yield (Proof), MPa 220
420 to 450

Thermal Properties

Latent Heat of Fusion, J/g 250
370
Maximum Temperature: Mechanical, °C 400
180
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1420
480
Specific Heat Capacity, J/kg-K 470
860
Thermal Conductivity, W/m-K 52
130
Thermal Expansion, µm/m-K 12
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
36
Electrical Conductivity: Equal Weight (Specific), % IACS 8.1
110

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
10
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 1.4
8.1
Embodied Energy, MJ/kg 18
140
Embodied Water, L/kg 46
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110
31 to 34
Resilience: Unit (Modulus of Resilience), kJ/m3 130
1270 to 1440
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
45
Strength to Weight: Axial, points 16
46 to 47
Strength to Weight: Bending, points 17
46 to 47
Thermal Diffusivity, mm2/s 14
51
Thermal Shock Resistance, points 14
22 to 23

Alloy Composition

Aluminum (Al), % 0
85.7 to 89.5
Carbon (C), % 0 to 0.18
0
Chromium (Cr), % 0
0.1 to 0.22
Copper (Cu), % 0
1.2 to 1.9
Iron (Fe), % 98 to 100
0 to 0.35
Magnesium (Mg), % 0
2.0 to 2.9
Manganese (Mn), % 0 to 1.2
0 to 0.2
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.6
0 to 0.25
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
7.2 to 8.2
Residuals, % 0
0 to 0.15