MakeItFrom.com
Menu (ESC)

EN 1.0456 Steel vs. 514.0 Aluminum

EN 1.0456 steel belongs to the iron alloys classification, while 514.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.0456 steel and the bottom bar is 514.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 120 to 130
50
Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 24 to 26
7.3
Fatigue Strength, MPa 210 to 220
48
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
25
Shear Strength, MPa 270 to 280
140
Tensile Strength: Ultimate (UTS), MPa 420 to 450
180
Tensile Strength: Yield (Proof), MPa 290 to 300
74

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1420
610
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 48
140
Thermal Expansion, µm/m-K 12
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.3
35
Electrical Conductivity: Equal Weight (Specific), % IACS 8.4
120

Otherwise Unclassified Properties

Base Metal Price, % relative 2.2
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.5
8.9
Embodied Energy, MJ/kg 20
150
Embodied Water, L/kg 49
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 93 to 99
11
Resilience: Unit (Modulus of Resilience), kJ/m3 220 to 230
41
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 15 to 16
19
Strength to Weight: Bending, points 16 to 17
26
Thermal Diffusivity, mm2/s 13
57
Thermal Shock Resistance, points 13 to 14
7.9

Alloy Composition

Aluminum (Al), % 0.020 to 0.060
93.6 to 96.5
Carbon (C), % 0 to 0.2
0
Chromium (Cr), % 0 to 0.3
0
Copper (Cu), % 0 to 0.35
0 to 0.15
Iron (Fe), % 96.7 to 99.48
0 to 0.5
Magnesium (Mg), % 0
3.5 to 4.5
Manganese (Mn), % 0.5 to 1.4
0 to 0.35
Molybdenum (Mo), % 0 to 0.1
0
Nickel (Ni), % 0 to 0.3
0
Niobium (Nb), % 0 to 0.050
0
Nitrogen (N), % 0 to 0.015
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.4
0 to 0.35
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0 to 0.030
0 to 0.25
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15