MakeItFrom.com
Menu (ESC)

EN 1.1147 Steel vs. 520.0 Aluminum

EN 1.1147 steel belongs to the iron alloys classification, while 520.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.1147 steel and the bottom bar is 520.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110 to 140
75
Elastic (Young's, Tensile) Modulus, GPa 190
66
Elongation at Break, % 12 to 17
14
Fatigue Strength, MPa 180 to 250
55
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
25
Shear Strength, MPa 280
230
Tensile Strength: Ultimate (UTS), MPa 390 to 470
330
Tensile Strength: Yield (Proof), MPa 280 to 370
170

Thermal Properties

Latent Heat of Fusion, J/g 250
390
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
600
Melting Onset (Solidus), °C 1420
480
Specific Heat Capacity, J/kg-K 470
910
Thermal Conductivity, W/m-K 51
87
Thermal Expansion, µm/m-K 12
25

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
21
Electrical Conductivity: Equal Weight (Specific), % IACS 8.1
72

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
9.5
Density, g/cm3 7.8
2.6
Embodied Carbon, kg CO2/kg material 1.4
9.8
Embodied Energy, MJ/kg 18
160
Embodied Water, L/kg 46
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 40 to 73
39
Resilience: Unit (Modulus of Resilience), kJ/m3 210 to 370
230
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
52
Strength to Weight: Axial, points 14 to 17
35
Strength to Weight: Bending, points 15 to 17
41
Thermal Diffusivity, mm2/s 14
37
Thermal Shock Resistance, points 12 to 15
14

Alloy Composition

Aluminum (Al), % 0
87.9 to 90.5
Carbon (C), % 0.15 to 0.19
0
Copper (Cu), % 0 to 0.25
0 to 0.25
Iron (Fe), % 98.3 to 99.25
0 to 0.3
Magnesium (Mg), % 0
9.5 to 10.6
Manganese (Mn), % 0.6 to 0.9
0 to 0.15
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.3
0 to 0.25
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15