MakeItFrom.com
Menu (ESC)

EN 1.3967 Stainless Steel vs. EN AC-21200 Aluminum

EN 1.3967 stainless steel belongs to the iron alloys classification, while EN AC-21200 aluminum belongs to the aluminum alloys. There are 26 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.3967 stainless steel and the bottom bar is EN AC-21200 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 200
120 to 130
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 22
3.9 to 6.2
Fatigue Strength, MPa 240
110 to 130
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 79
27
Tensile Strength: Ultimate (UTS), MPa 690
410 to 440
Tensile Strength: Yield (Proof), MPa 350
270 to 360

Thermal Properties

Latent Heat of Fusion, J/g 300
390
Maximum Temperature: Mechanical, °C 1070
170
Melting Completion (Liquidus), °C 1430
660
Melting Onset (Solidus), °C 1380
550
Specific Heat Capacity, J/kg-K 470
880
Thermal Expansion, µm/m-K 16
23

Otherwise Unclassified Properties

Base Metal Price, % relative 25
10
Density, g/cm3 7.9
3.0
Embodied Carbon, kg CO2/kg material 4.8
8.0
Embodied Energy, MJ/kg 66
150
Embodied Water, L/kg 180
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 130
16 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 310
500 to 930
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 24
38 to 40
Strength to Weight: Bending, points 22
41 to 43
Thermal Shock Resistance, points 15
18 to 19

Alloy Composition

Aluminum (Al), % 0
93.3 to 95.7
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 20 to 21.5
0
Copper (Cu), % 0
4.0 to 5.0
Iron (Fe), % 50.3 to 57.8
0 to 0.2
Lead (Pb), % 0
0 to 0.030
Magnesium (Mg), % 0
0.15 to 0.5
Manganese (Mn), % 4.0 to 6.0
0.2 to 0.5
Molybdenum (Mo), % 3.0 to 3.5
0
Nickel (Ni), % 15 to 17
0 to 0.050
Niobium (Nb), % 0 to 0.25
0
Nitrogen (N), % 0.2 to 0.35
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 1.0
0 to 0.1
Sulfur (S), % 0 to 0.010
0
Tin (Sn), % 0
0 to 0.030
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.1