MakeItFrom.com
Menu (ESC)

EN 1.4005 Stainless Steel vs. 392.0 Aluminum

EN 1.4005 stainless steel belongs to the iron alloys classification, while 392.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4005 stainless steel and the bottom bar is 392.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
75
Elongation at Break, % 13 to 21
0.86
Fatigue Strength, MPa 240 to 290
190
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
28
Tensile Strength: Ultimate (UTS), MPa 630 to 750
290
Tensile Strength: Yield (Proof), MPa 370 to 500
270

Thermal Properties

Latent Heat of Fusion, J/g 270
670
Maximum Temperature: Mechanical, °C 760
170
Melting Completion (Liquidus), °C 1440
670
Melting Onset (Solidus), °C 1400
580
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 30
130
Thermal Expansion, µm/m-K 10
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.9
25
Electrical Conductivity: Equal Weight (Specific), % IACS 3.3
90

Otherwise Unclassified Properties

Base Metal Price, % relative 7.0
10
Density, g/cm3 7.7
2.5
Embodied Carbon, kg CO2/kg material 2.0
7.5
Embodied Energy, MJ/kg 28
140
Embodied Water, L/kg 100
950

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 90 to 110
2.4
Resilience: Unit (Modulus of Resilience), kJ/m3 350 to 650
490
Stiffness to Weight: Axial, points 14
17
Stiffness to Weight: Bending, points 25
56
Strength to Weight: Axial, points 23 to 27
32
Strength to Weight: Bending, points 21 to 24
39
Thermal Diffusivity, mm2/s 8.1
60
Thermal Shock Resistance, points 23 to 27
15

Alloy Composition

Aluminum (Al), % 0
73.9 to 80.6
Carbon (C), % 0.060 to 0.15
0
Chromium (Cr), % 12 to 14
0
Copper (Cu), % 0
0.4 to 0.8
Iron (Fe), % 82.4 to 87.8
0 to 1.5
Magnesium (Mg), % 0
0.8 to 1.2
Manganese (Mn), % 0 to 1.5
0.2 to 0.6
Molybdenum (Mo), % 0 to 0.6
0
Nickel (Ni), % 0
0 to 0.5
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
18 to 20
Sulfur (S), % 0.15 to 0.35
0
Tin (Sn), % 0
0 to 0.3
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.5