MakeItFrom.com
Menu (ESC)

EN 1.4005 Stainless Steel vs. 705.0 Aluminum

EN 1.4005 stainless steel belongs to the iron alloys classification, while 705.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4005 stainless steel and the bottom bar is 705.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
69
Elongation at Break, % 13 to 21
8.4 to 10
Fatigue Strength, MPa 240 to 290
63 to 98
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Tensile Strength: Ultimate (UTS), MPa 630 to 750
240 to 260
Tensile Strength: Yield (Proof), MPa 370 to 500
130

Thermal Properties

Latent Heat of Fusion, J/g 270
390
Maximum Temperature: Mechanical, °C 760
180
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1400
610
Specific Heat Capacity, J/kg-K 480
890
Thermal Conductivity, W/m-K 30
140
Thermal Expansion, µm/m-K 10
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.9
34
Electrical Conductivity: Equal Weight (Specific), % IACS 3.3
110

Otherwise Unclassified Properties

Base Metal Price, % relative 7.0
9.5
Density, g/cm3 7.7
2.8
Embodied Carbon, kg CO2/kg material 2.0
8.4
Embodied Energy, MJ/kg 28
150
Embodied Water, L/kg 100
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 90 to 110
18 to 20
Resilience: Unit (Modulus of Resilience), kJ/m3 350 to 650
120 to 130
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
49
Strength to Weight: Axial, points 23 to 27
24 to 26
Strength to Weight: Bending, points 21 to 24
31 to 32
Thermal Diffusivity, mm2/s 8.1
55
Thermal Shock Resistance, points 23 to 27
11

Alloy Composition

Aluminum (Al), % 0
92.3 to 98.6
Carbon (C), % 0.060 to 0.15
0
Chromium (Cr), % 12 to 14
0 to 0.4
Copper (Cu), % 0
0 to 0.2
Iron (Fe), % 82.4 to 87.8
0 to 0.8
Magnesium (Mg), % 0
1.4 to 1.8
Manganese (Mn), % 0 to 1.5
0 to 0.6
Molybdenum (Mo), % 0 to 0.6
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.2
Sulfur (S), % 0.15 to 0.35
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 3.3
Residuals, % 0
0 to 0.15