MakeItFrom.com
Menu (ESC)

EN 1.4005 Stainless Steel vs. 850.0 Aluminum

EN 1.4005 stainless steel belongs to the iron alloys classification, while 850.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4005 stainless steel and the bottom bar is 850.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
69
Elongation at Break, % 13 to 21
7.9
Fatigue Strength, MPa 240 to 290
59
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 390 to 450
100
Tensile Strength: Ultimate (UTS), MPa 630 to 750
140
Tensile Strength: Yield (Proof), MPa 370 to 500
76

Thermal Properties

Latent Heat of Fusion, J/g 270
380
Maximum Temperature: Mechanical, °C 760
190
Melting Completion (Liquidus), °C 1440
650
Melting Onset (Solidus), °C 1400
370
Specific Heat Capacity, J/kg-K 480
850
Thermal Conductivity, W/m-K 30
180
Thermal Expansion, µm/m-K 10
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.9
47
Electrical Conductivity: Equal Weight (Specific), % IACS 3.3
140

Otherwise Unclassified Properties

Base Metal Price, % relative 7.0
14
Density, g/cm3 7.7
3.1
Embodied Carbon, kg CO2/kg material 2.0
8.5
Embodied Energy, MJ/kg 28
160
Embodied Water, L/kg 100
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 90 to 110
9.1
Resilience: Unit (Modulus of Resilience), kJ/m3 350 to 650
42
Stiffness to Weight: Axial, points 14
12
Stiffness to Weight: Bending, points 25
44
Strength to Weight: Axial, points 23 to 27
12
Strength to Weight: Bending, points 21 to 24
19
Thermal Diffusivity, mm2/s 8.1
69
Thermal Shock Resistance, points 23 to 27
6.1

Alloy Composition

Aluminum (Al), % 0
88.3 to 93.1
Carbon (C), % 0.060 to 0.15
0
Chromium (Cr), % 12 to 14
0
Copper (Cu), % 0
0.7 to 1.3
Iron (Fe), % 82.4 to 87.8
0 to 0.7
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 0 to 1.5
0 to 0.1
Molybdenum (Mo), % 0 to 0.6
0
Nickel (Ni), % 0
0.7 to 1.3
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.7
Sulfur (S), % 0.15 to 0.35
0
Tin (Sn), % 0
5.5 to 7.0
Titanium (Ti), % 0
0 to 0.2
Residuals, % 0
0 to 0.3