MakeItFrom.com
Menu (ESC)

EN 1.4104 Stainless Steel vs. EN AC-71100 Aluminum

EN 1.4104 stainless steel belongs to the iron alloys classification, while EN AC-71100 aluminum belongs to the aluminum alloys. There are 27 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4104 stainless steel and the bottom bar is EN AC-71100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
72
Elongation at Break, % 11 to 23
1.1
Fatigue Strength, MPa 230 to 310
150
Poisson's Ratio 0.28
0.32
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 630 to 750
260
Tensile Strength: Yield (Proof), MPa 350 to 560
230

Thermal Properties

Latent Heat of Fusion, J/g 280
490
Maximum Temperature: Mechanical, °C 860
170
Melting Completion (Liquidus), °C 1440
580
Melting Onset (Solidus), °C 1390
520
Specific Heat Capacity, J/kg-K 480
860
Thermal Expansion, µm/m-K 10
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.5
32
Electrical Conductivity: Equal Weight (Specific), % IACS 2.9
97

Otherwise Unclassified Properties

Base Metal Price, % relative 8.5
9.5
Density, g/cm3 7.7
2.9
Embodied Carbon, kg CO2/kg material 2.2
7.4
Embodied Energy, MJ/kg 30
140
Embodied Water, L/kg 120
1010

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 77 to 120
2.8
Resilience: Unit (Modulus of Resilience), kJ/m3 310 to 800
360
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 23 to 27
25
Strength to Weight: Bending, points 21 to 24
31
Thermal Shock Resistance, points 22 to 27
12

Alloy Composition

Aluminum (Al), % 0
78.7 to 83.3
Carbon (C), % 0.1 to 0.17
0
Chromium (Cr), % 15.5 to 17.5
0
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 78.8 to 84.1
0 to 0.3
Magnesium (Mg), % 0
0.2 to 0.5
Manganese (Mn), % 0 to 1.5
0 to 0.15
Molybdenum (Mo), % 0.2 to 0.6
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
7.5 to 9.5
Sulfur (S), % 0.15 to 0.35
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
9.0 to 10.5
Residuals, % 0
0 to 0.15