MakeItFrom.com
Menu (ESC)

EN 1.4109 Stainless Steel vs. 358.0 Aluminum

EN 1.4109 stainless steel belongs to the iron alloys classification, while 358.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4109 stainless steel and the bottom bar is 358.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 19
3.5 to 6.0
Fatigue Strength, MPa 270
100 to 110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
27
Shear Strength, MPa 480
300 to 320
Tensile Strength: Ultimate (UTS), MPa 770
350 to 370
Tensile Strength: Yield (Proof), MPa 420
290 to 320

Thermal Properties

Latent Heat of Fusion, J/g 280
520
Maximum Temperature: Mechanical, °C 820
170
Melting Completion (Liquidus), °C 1440
600
Melting Onset (Solidus), °C 1400
560
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 30
150
Thermal Expansion, µm/m-K 10
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.7
36
Electrical Conductivity: Equal Weight (Specific), % IACS 3.1
130

Otherwise Unclassified Properties

Base Metal Price, % relative 8.5
19
Density, g/cm3 7.7
2.6
Embodied Carbon, kg CO2/kg material 2.2
8.7
Embodied Energy, MJ/kg 30
160
Embodied Water, L/kg 110
1090

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120
12 to 20
Resilience: Unit (Modulus of Resilience), kJ/m3 460
590 to 710
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
53
Strength to Weight: Axial, points 28
37 to 39
Strength to Weight: Bending, points 24
42 to 44
Thermal Diffusivity, mm2/s 8.1
63
Thermal Shock Resistance, points 28
16 to 17

Alloy Composition

Aluminum (Al), % 0
89.1 to 91.8
Beryllium (Be), % 0
0.1 to 0.3
Carbon (C), % 0.6 to 0.75
0
Chromium (Cr), % 14 to 16
0 to 0.2
Copper (Cu), % 0
0 to 0.2
Iron (Fe), % 80.7 to 85
0 to 0.3
Magnesium (Mg), % 0
0.4 to 0.6
Manganese (Mn), % 0 to 1.0
0 to 0.2
Molybdenum (Mo), % 0.4 to 0.8
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 0.7
7.6 to 8.6
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0.1 to 0.2
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.15