MakeItFrom.com
Menu (ESC)

EN 1.4110 Stainless Steel vs. 1050 Aluminum

EN 1.4110 stainless steel belongs to the iron alloys classification, while 1050 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4110 stainless steel and the bottom bar is 1050 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 11 to 14
4.6 to 37
Fatigue Strength, MPa 250 to 730
31 to 57
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 470 to 1030
52 to 81
Tensile Strength: Ultimate (UTS), MPa 770 to 1720
76 to 140
Tensile Strength: Yield (Proof), MPa 430 to 1330
25 to 120

Thermal Properties

Latent Heat of Fusion, J/g 280
400
Maximum Temperature: Mechanical, °C 790
170
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1400
650
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 30
230
Thermal Expansion, µm/m-K 11
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.8
61
Electrical Conductivity: Equal Weight (Specific), % IACS 3.2
200

Otherwise Unclassified Properties

Base Metal Price, % relative 8.0
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.3
8.3
Embodied Energy, MJ/kg 33
160
Embodied Water, L/kg 110
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 90 to 180
5.4 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 480 to 4550
4.6 to 110
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 28 to 62
7.8 to 14
Strength to Weight: Bending, points 24 to 41
15 to 22
Thermal Diffusivity, mm2/s 8.1
94
Thermal Shock Resistance, points 27 to 60
3.4 to 6.2

Alloy Composition

Aluminum (Al), % 0
99.5 to 100
Carbon (C), % 0.48 to 0.6
0
Chromium (Cr), % 13 to 15
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 81.4 to 86
0 to 0.4
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0 to 1.0
0 to 0.050
Molybdenum (Mo), % 0.5 to 0.8
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.25
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.030
Vanadium (V), % 0 to 0.15
0 to 0.050
Zinc (Zn), % 0
0 to 0.050

Comparable Variants