MakeItFrom.com
Menu (ESC)

EN 1.4110 Stainless Steel vs. EN AC-21100 Aluminum

EN 1.4110 stainless steel belongs to the iron alloys classification, while EN AC-21100 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4110 stainless steel and the bottom bar is EN AC-21100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
71
Elongation at Break, % 11 to 14
6.2 to 7.3
Fatigue Strength, MPa 250 to 730
79 to 87
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
27
Tensile Strength: Ultimate (UTS), MPa 770 to 1720
340 to 350
Tensile Strength: Yield (Proof), MPa 430 to 1330
210 to 240

Thermal Properties

Latent Heat of Fusion, J/g 280
390
Maximum Temperature: Mechanical, °C 790
170
Melting Completion (Liquidus), °C 1440
670
Melting Onset (Solidus), °C 1400
550
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 30
130
Thermal Expansion, µm/m-K 11
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.8
34
Electrical Conductivity: Equal Weight (Specific), % IACS 3.2
100

Otherwise Unclassified Properties

Base Metal Price, % relative 8.0
11
Density, g/cm3 7.7
3.0
Embodied Carbon, kg CO2/kg material 2.3
8.0
Embodied Energy, MJ/kg 33
150
Embodied Water, L/kg 110
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 90 to 180
19 to 21
Resilience: Unit (Modulus of Resilience), kJ/m3 480 to 4550
300 to 400
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 28 to 62
31 to 33
Strength to Weight: Bending, points 24 to 41
36 to 37
Thermal Diffusivity, mm2/s 8.1
48
Thermal Shock Resistance, points 27 to 60
15

Alloy Composition

Aluminum (Al), % 0
93.4 to 95.7
Carbon (C), % 0.48 to 0.6
0
Chromium (Cr), % 13 to 15
0
Copper (Cu), % 0
4.2 to 5.2
Iron (Fe), % 81.4 to 86
0 to 0.19
Manganese (Mn), % 0 to 1.0
0 to 0.55
Molybdenum (Mo), % 0.5 to 0.8
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.18
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0.15 to 0.3
Vanadium (V), % 0 to 0.15
0
Zinc (Zn), % 0
0 to 0.070
Residuals, % 0
0 to 0.1