MakeItFrom.com
Menu (ESC)

EN 1.4110 Stainless Steel vs. EN AC-51300 Aluminum

EN 1.4110 stainless steel belongs to the iron alloys classification, while EN AC-51300 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4110 stainless steel and the bottom bar is EN AC-51300 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
67
Elongation at Break, % 11 to 14
3.7
Fatigue Strength, MPa 250 to 730
78
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
25
Tensile Strength: Ultimate (UTS), MPa 770 to 1720
190
Tensile Strength: Yield (Proof), MPa 430 to 1330
110

Thermal Properties

Latent Heat of Fusion, J/g 280
400
Maximum Temperature: Mechanical, °C 790
170
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1400
600
Specific Heat Capacity, J/kg-K 480
910
Thermal Conductivity, W/m-K 30
110
Thermal Expansion, µm/m-K 11
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.8
31
Electrical Conductivity: Equal Weight (Specific), % IACS 3.2
100

Otherwise Unclassified Properties

Base Metal Price, % relative 8.0
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.3
9.1
Embodied Energy, MJ/kg 33
150
Embodied Water, L/kg 110
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 90 to 180
6.1
Resilience: Unit (Modulus of Resilience), kJ/m3 480 to 4550
87
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 28 to 62
20
Strength to Weight: Bending, points 24 to 41
28
Thermal Diffusivity, mm2/s 8.1
45
Thermal Shock Resistance, points 27 to 60
8.6

Alloy Composition

Aluminum (Al), % 0
91.4 to 95.5
Carbon (C), % 0.48 to 0.6
0
Chromium (Cr), % 13 to 15
0
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 81.4 to 86
0 to 0.55
Magnesium (Mg), % 0
4.5 to 6.5
Manganese (Mn), % 0 to 1.0
0 to 0.45
Molybdenum (Mo), % 0.5 to 0.8
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.55
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.2
Vanadium (V), % 0 to 0.15
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15