MakeItFrom.com
Menu (ESC)

EN 1.4303 Stainless Steel vs. 5070 Aluminum

EN 1.4303 stainless steel belongs to the iron alloys classification, while 5070 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4303 stainless steel and the bottom bar is 5070 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 13 to 49
20
Fatigue Strength, MPa 220 to 320
150
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 420 to 540
190
Tensile Strength: Ultimate (UTS), MPa 590 to 900
300
Tensile Strength: Yield (Proof), MPa 230 to 560
140

Thermal Properties

Latent Heat of Fusion, J/g 290
390
Maximum Temperature: Mechanical, °C 940
190
Melting Completion (Liquidus), °C 1420
640
Melting Onset (Solidus), °C 1380
550
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 16
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
31
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
100

Otherwise Unclassified Properties

Base Metal Price, % relative 17
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.2
8.8
Embodied Energy, MJ/kg 46
150
Embodied Water, L/kg 150
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 230
51
Resilience: Unit (Modulus of Resilience), kJ/m3 140 to 800
150
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 21 to 32
31
Strength to Weight: Bending, points 20 to 26
37
Thermal Diffusivity, mm2/s 4.0
53
Thermal Shock Resistance, points 13 to 20
14

Alloy Composition

Aluminum (Al), % 0
92.4 to 95.7
Carbon (C), % 0 to 0.060
0
Chromium (Cr), % 17 to 19
0 to 0.3
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 64.8 to 72
0 to 0.4
Magnesium (Mg), % 0
3.5 to 4.5
Manganese (Mn), % 0 to 2.0
0.4 to 0.8
Nickel (Ni), % 11 to 13
0
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.25
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0.4 to 0.8
Residuals, % 0
0 to 0.15