MakeItFrom.com
Menu (ESC)

EN 1.4303 Stainless Steel vs. 5657 Aluminum

EN 1.4303 stainless steel belongs to the iron alloys classification, while 5657 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4303 stainless steel and the bottom bar is 5657 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190 to 270
40 to 50
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 13 to 49
6.6 to 15
Fatigue Strength, MPa 220 to 320
74 to 88
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 420 to 540
92 to 110
Tensile Strength: Ultimate (UTS), MPa 590 to 900
150 to 200
Tensile Strength: Yield (Proof), MPa 230 to 560
140 to 170

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 940
180
Melting Completion (Liquidus), °C 1420
660
Melting Onset (Solidus), °C 1380
640
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
210
Thermal Expansion, µm/m-K 16
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
54
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
180

Otherwise Unclassified Properties

Base Metal Price, % relative 17
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.2
8.4
Embodied Energy, MJ/kg 46
160
Embodied Water, L/kg 150
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 230
9.7 to 27
Resilience: Unit (Modulus of Resilience), kJ/m3 140 to 800
140 to 200
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 21 to 32
15 to 20
Strength to Weight: Bending, points 20 to 26
23 to 28
Thermal Diffusivity, mm2/s 4.0
84
Thermal Shock Resistance, points 13 to 20
6.7 to 8.6

Alloy Composition

Aluminum (Al), % 0
98.5 to 99.4
Carbon (C), % 0 to 0.060
0
Chromium (Cr), % 17 to 19
0
Copper (Cu), % 0
0 to 0.1
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 64.8 to 72
0 to 0.1
Magnesium (Mg), % 0
0.6 to 1.0
Manganese (Mn), % 0 to 2.0
0 to 0.030
Nickel (Ni), % 11 to 13
0
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.080
Sulfur (S), % 0 to 0.015
0
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.050
Residuals, % 0
0 to 0.050

Comparable Variants