MakeItFrom.com
Menu (ESC)

EN 1.4307 Stainless Steel vs. EN AC-45000 Aluminum

EN 1.4307 stainless steel belongs to the iron alloys classification, while EN AC-45000 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4307 stainless steel and the bottom bar is EN AC-45000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180 to 270
77
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 14 to 46
1.1
Fatigue Strength, MPa 190 to 320
75
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 590 to 900
180
Tensile Strength: Yield (Proof), MPa 200 to 570
110

Thermal Properties

Latent Heat of Fusion, J/g 290
470
Maximum Temperature: Mechanical, °C 940
180
Melting Completion (Liquidus), °C 1430
640
Melting Onset (Solidus), °C 1380
520
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 15
120
Thermal Expansion, µm/m-K 16
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
27
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
81

Otherwise Unclassified Properties

Base Metal Price, % relative 15
11
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 3.0
7.7
Embodied Energy, MJ/kg 43
140
Embodied Water, L/kg 140
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 210
1.7
Resilience: Unit (Modulus of Resilience), kJ/m3 100 to 810
80
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 21 to 32
17
Strength to Weight: Bending, points 20 to 27
24
Thermal Diffusivity, mm2/s 4.0
47
Thermal Shock Resistance, points 13 to 20
8.0

Alloy Composition

Aluminum (Al), % 0
82.2 to 91.8
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 17.5 to 19.5
0 to 0.15
Copper (Cu), % 0
3.0 to 5.0
Iron (Fe), % 66.8 to 74.5
0 to 1.0
Lead (Pb), % 0
0 to 0.3
Magnesium (Mg), % 0
0 to 0.55
Manganese (Mn), % 0 to 2.0
0.2 to 0.65
Nickel (Ni), % 8.0 to 10.5
0 to 0.45
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
5.0 to 7.0
Sulfur (S), % 0 to 0.015
0
Tin (Sn), % 0
0 to 0.15
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 2.0
Residuals, % 0
0 to 0.35