MakeItFrom.com
Menu (ESC)

EN 1.4310 Stainless Steel vs. 711.0 Aluminum

EN 1.4310 stainless steel belongs to the iron alloys classification, while 711.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4310 stainless steel and the bottom bar is 711.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 200 to 270
70
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 14 to 45
7.8
Fatigue Strength, MPa 240 to 330
100
Poisson's Ratio 0.28
0.32
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 730 to 900
220
Tensile Strength: Yield (Proof), MPa 260 to 570
140

Thermal Properties

Latent Heat of Fusion, J/g 290
380
Maximum Temperature: Mechanical, °C 910
170
Melting Completion (Liquidus), °C 1420
640
Melting Onset (Solidus), °C 1380
610
Specific Heat Capacity, J/kg-K 480
860
Thermal Conductivity, W/m-K 15
160
Thermal Expansion, µm/m-K 18
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
40
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
120

Otherwise Unclassified Properties

Base Metal Price, % relative 14
9.5
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 2.9
7.9
Embodied Energy, MJ/kg 42
150
Embodied Water, L/kg 140
1120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 260
15
Resilience: Unit (Modulus of Resilience), kJ/m3 170 to 830
140
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 26 to 32
20
Strength to Weight: Bending, points 23 to 27
26
Thermal Diffusivity, mm2/s 4.0
61
Thermal Shock Resistance, points 15 to 18
9.3

Alloy Composition

Aluminum (Al), % 0
89.8 to 92.7
Carbon (C), % 0.050 to 0.15
0
Chromium (Cr), % 16 to 19
0
Copper (Cu), % 0
0.35 to 0.65
Iron (Fe), % 66.4 to 78
0.7 to 1.4
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0 to 2.0
0 to 0.050
Molybdenum (Mo), % 0 to 0.8
0
Nickel (Ni), % 6.0 to 9.5
0
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 2.0
0 to 0.3
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
6.0 to 7.0
Residuals, % 0
0 to 0.15