EN 1.4310 Stainless Steel vs. 7475 Aluminum
EN 1.4310 stainless steel belongs to the iron alloys classification, while 7475 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EN 1.4310 stainless steel and the bottom bar is 7475 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 200 | |
70 |
Elongation at Break, % | 14 to 45 | |
10 to 12 |
Fatigue Strength, MPa | 240 to 330 | |
190 to 210 |
Poisson's Ratio | 0.28 | |
0.32 |
Shear Modulus, GPa | 77 | |
26 |
Shear Strength, MPa | 510 to 550 | |
320 to 350 |
Tensile Strength: Ultimate (UTS), MPa | 730 to 900 | |
530 to 590 |
Tensile Strength: Yield (Proof), MPa | 260 to 570 | |
440 to 520 |
Thermal Properties
Latent Heat of Fusion, J/g | 290 | |
380 |
Maximum Temperature: Mechanical, °C | 910 | |
180 |
Melting Completion (Liquidus), °C | 1420 | |
640 |
Melting Onset (Solidus), °C | 1380 | |
480 |
Specific Heat Capacity, J/kg-K | 480 | |
870 |
Thermal Conductivity, W/m-K | 15 | |
140 to 160 |
Thermal Expansion, µm/m-K | 18 | |
23 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 2.4 | |
33 to 42 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 2.7 | |
98 to 120 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 14 | |
10 |
Density, g/cm3 | 7.8 | |
3.0 |
Embodied Carbon, kg CO2/kg material | 2.9 | |
8.2 |
Embodied Energy, MJ/kg | 42 | |
150 |
Embodied Water, L/kg | 140 | |
1130 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 110 to 260 | |
53 to 68 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 170 to 830 | |
1390 to 1920 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 25 | |
46 |
Strength to Weight: Axial, points | 26 to 32 | |
49 to 55 |
Strength to Weight: Bending, points | 23 to 27 | |
48 to 52 |
Thermal Diffusivity, mm2/s | 4.0 | |
53 to 63 |
Thermal Shock Resistance, points | 15 to 18 | |
23 to 26 |
Alloy Composition
Aluminum (Al), % | 0 | |
88.6 to 91.6 |
Carbon (C), % | 0.050 to 0.15 | |
0 |
Chromium (Cr), % | 16 to 19 | |
0.18 to 0.25 |
Copper (Cu), % | 0 | |
1.2 to 1.9 |
Iron (Fe), % | 66.4 to 78 | |
0 to 0.12 |
Magnesium (Mg), % | 0 | |
1.9 to 2.6 |
Manganese (Mn), % | 0 to 2.0 | |
0 to 0.060 |
Molybdenum (Mo), % | 0 to 0.8 | |
0 |
Nickel (Ni), % | 6.0 to 9.5 | |
0 |
Nitrogen (N), % | 0 to 0.1 | |
0 |
Phosphorus (P), % | 0 to 0.045 | |
0 |
Silicon (Si), % | 0 to 2.0 | |
0 to 0.1 |
Sulfur (S), % | 0 to 0.015 | |
0 |
Titanium (Ti), % | 0 | |
0 to 0.060 |
Zinc (Zn), % | 0 | |
5.1 to 6.2 |
Residuals, % | 0 | |
0 to 0.15 |