MakeItFrom.com
Menu (ESC)

EN 1.4347 Stainless Steel vs. 707.0 Aluminum

EN 1.4347 stainless steel belongs to the iron alloys classification, while 707.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4347 stainless steel and the bottom bar is 707.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 23
1.7 to 3.4
Fatigue Strength, MPa 320
75 to 140
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 79
26
Tensile Strength: Ultimate (UTS), MPa 660
270 to 300
Tensile Strength: Yield (Proof), MPa 480
170 to 250

Thermal Properties

Latent Heat of Fusion, J/g 300
380
Maximum Temperature: Mechanical, °C 1100
180
Melting Completion (Liquidus), °C 1410
630
Melting Onset (Solidus), °C 1370
600
Specific Heat Capacity, J/kg-K 490
880
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.1
37
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
110

Otherwise Unclassified Properties

Base Metal Price, % relative 16
9.5
Density, g/cm3 7.7
2.9
Embodied Carbon, kg CO2/kg material 3.1
8.3
Embodied Energy, MJ/kg 44
150
Embodied Water, L/kg 170
1140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
4.3 to 8.6
Resilience: Unit (Modulus of Resilience), kJ/m3 570
210 to 430
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 24
26 to 29
Strength to Weight: Bending, points 22
32 to 34
Thermal Diffusivity, mm2/s 4.0
58
Thermal Shock Resistance, points 19
12 to 13

Alloy Composition

Aluminum (Al), % 0
90.5 to 93.6
Carbon (C), % 0 to 0.050
0
Chromium (Cr), % 25 to 27
0.2 to 0.4
Copper (Cu), % 0
0 to 0.2
Iron (Fe), % 62.2 to 69.4
0 to 0.8
Magnesium (Mg), % 0
1.8 to 2.4
Manganese (Mn), % 0 to 1.5
0.4 to 0.6
Nickel (Ni), % 5.5 to 7.5
0
Nitrogen (N), % 0.1 to 0.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.5
0 to 0.2
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
4.0 to 4.5
Residuals, % 0
0 to 0.15