MakeItFrom.com
Menu (ESC)

EN 1.4401 Stainless Steel vs. 356.0 Aluminum

EN 1.4401 stainless steel belongs to the iron alloys classification, while 356.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4401 stainless steel and the bottom bar is 356.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190 to 270
55 to 75
Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 14 to 40
2.0 to 3.8
Fatigue Strength, MPa 200 to 320
55 to 75
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 78
27
Shear Strength, MPa 410 to 550
140 to 190
Tensile Strength: Ultimate (UTS), MPa 600 to 900
160 to 240
Tensile Strength: Yield (Proof), MPa 230 to 570
100 to 190

Thermal Properties

Latent Heat of Fusion, J/g 290
500
Maximum Temperature: Mechanical, °C 950
170
Melting Completion (Liquidus), °C 1440
620
Melting Onset (Solidus), °C 1400
570
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 15
150 to 170
Thermal Expansion, µm/m-K 16
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.3
40 to 43
Electrical Conductivity: Equal Weight (Specific), % IACS 2.6
140 to 150

Otherwise Unclassified Properties

Base Metal Price, % relative 19
9.5
Density, g/cm3 7.9
2.6
Embodied Carbon, kg CO2/kg material 3.8
8.0
Embodied Energy, MJ/kg 52
150
Embodied Water, L/kg 150
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 190
3.2 to 8.2
Resilience: Unit (Modulus of Resilience), kJ/m3 130 to 800
70 to 250
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
53
Strength to Weight: Axial, points 21 to 32
17 to 26
Strength to Weight: Bending, points 20 to 26
25 to 33
Thermal Diffusivity, mm2/s 4.0
64 to 71
Thermal Shock Resistance, points 13 to 20
7.6 to 11

Alloy Composition

Aluminum (Al), % 0
90.1 to 93.3
Carbon (C), % 0 to 0.070
0
Chromium (Cr), % 16.5 to 18.5
0
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 62.8 to 71.5
0 to 0.6
Magnesium (Mg), % 0
0.2 to 0.45
Manganese (Mn), % 0 to 2.0
0 to 0.35
Molybdenum (Mo), % 2.0 to 2.5
0
Nickel (Ni), % 10 to 13
0
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
6.5 to 7.5
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15

Comparable Variants