MakeItFrom.com
Menu (ESC)

EN 1.4401 Stainless Steel vs. 5110A Aluminum

EN 1.4401 stainless steel belongs to the iron alloys classification, while 5110A aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4401 stainless steel and the bottom bar is 5110A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 14 to 40
4.5 to 28
Fatigue Strength, MPa 200 to 320
37 to 77
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 78
26
Shear Strength, MPa 410 to 550
66 to 110
Tensile Strength: Ultimate (UTS), MPa 600 to 900
100 to 190
Tensile Strength: Yield (Proof), MPa 230 to 570
32 to 170

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 950
180
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1400
640
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 15
220
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.3
57
Electrical Conductivity: Equal Weight (Specific), % IACS 2.6
190

Otherwise Unclassified Properties

Base Metal Price, % relative 19
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 3.8
8.3
Embodied Energy, MJ/kg 52
150
Embodied Water, L/kg 150
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 190
6.8 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 130 to 800
7.6 to 200
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 21 to 32
10 to 19
Strength to Weight: Bending, points 20 to 26
18 to 27
Thermal Diffusivity, mm2/s 4.0
91
Thermal Shock Resistance, points 13 to 20
4.5 to 8.4

Alloy Composition

Aluminum (Al), % 0
98.5 to 99.8
Carbon (C), % 0 to 0.070
0
Chromium (Cr), % 16.5 to 18.5
0
Copper (Cu), % 0
0 to 0.2
Iron (Fe), % 62.8 to 71.5
0 to 0.25
Magnesium (Mg), % 0
0.2 to 0.6
Manganese (Mn), % 0 to 2.0
0 to 0.2
Molybdenum (Mo), % 2.0 to 2.5
0
Nickel (Ni), % 10 to 13
0
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.15
Sulfur (S), % 0 to 0.015
0
Zinc (Zn), % 0
0 to 0.030
Residuals, % 0
0 to 0.1

Comparable Variants