MakeItFrom.com
Menu (ESC)

EN 1.4405 Stainless Steel vs. 713.0 Aluminum

EN 1.4405 stainless steel belongs to the iron alloys classification, while 713.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4405 stainless steel and the bottom bar is 713.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 17
3.9 to 4.3
Fatigue Strength, MPa 370
63 to 120
Poisson's Ratio 0.28
0.32
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 860
240 to 260
Tensile Strength: Yield (Proof), MPa 610
170

Thermal Properties

Latent Heat of Fusion, J/g 280
370
Maximum Temperature: Mechanical, °C 870
180
Melting Completion (Liquidus), °C 1450
630
Melting Onset (Solidus), °C 1400
610
Specific Heat Capacity, J/kg-K 480
860
Thermal Conductivity, W/m-K 17
150
Thermal Expansion, µm/m-K 11
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
100

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.5
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 2.8
7.8
Embodied Energy, MJ/kg 39
150
Embodied Water, L/kg 130
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 130
8.7 to 9.9
Resilience: Unit (Modulus of Resilience), kJ/m3 950
210 to 220
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 31
22 to 23
Strength to Weight: Bending, points 26
28 to 29
Thermal Diffusivity, mm2/s 4.6
57
Thermal Shock Resistance, points 29
10 to 11

Alloy Composition

Aluminum (Al), % 0
87.6 to 92.4
Carbon (C), % 0 to 0.060
0
Chromium (Cr), % 15 to 17
0 to 0.35
Copper (Cu), % 0
0.4 to 1.0
Iron (Fe), % 73.6 to 80.3
0 to 1.1
Magnesium (Mg), % 0
0.2 to 0.5
Manganese (Mn), % 0 to 1.0
0 to 0.6
Molybdenum (Mo), % 0.7 to 1.5
0
Nickel (Ni), % 4.0 to 6.0
0 to 0.15
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.8
0 to 0.25
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
7.0 to 8.0
Residuals, % 0
0 to 0.25