MakeItFrom.com
Menu (ESC)

EN 1.4405 Stainless Steel vs. A201.0 Aluminum

EN 1.4405 stainless steel belongs to the iron alloys classification, while A201.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4405 stainless steel and the bottom bar is A201.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 17
4.7
Fatigue Strength, MPa 370
97
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 860
480
Tensile Strength: Yield (Proof), MPa 610
420

Thermal Properties

Latent Heat of Fusion, J/g 280
390
Maximum Temperature: Mechanical, °C 870
170
Melting Completion (Liquidus), °C 1450
650
Melting Onset (Solidus), °C 1400
570
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 17
120
Thermal Expansion, µm/m-K 11
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
30
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
90

Otherwise Unclassified Properties

Base Metal Price, % relative 13
11
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 2.8
8.1
Embodied Energy, MJ/kg 39
150
Embodied Water, L/kg 130
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 130
22
Resilience: Unit (Modulus of Resilience), kJ/m3 950
1250
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 31
44
Strength to Weight: Bending, points 26
45
Thermal Diffusivity, mm2/s 4.6
46
Thermal Shock Resistance, points 29
21

Alloy Composition

Aluminum (Al), % 0
93.7 to 95.5
Carbon (C), % 0 to 0.060
0
Chromium (Cr), % 15 to 17
0
Copper (Cu), % 0
4.0 to 5.0
Iron (Fe), % 73.6 to 80.3
0 to 0.1
Magnesium (Mg), % 0
0.15 to 0.35
Manganese (Mn), % 0 to 1.0
0.2 to 0.4
Molybdenum (Mo), % 0.7 to 1.5
0
Nickel (Ni), % 4.0 to 6.0
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.8
0 to 0.050
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0.15 to 0.35
Residuals, % 0
0 to 0.1