MakeItFrom.com
Menu (ESC)

EN 1.4410 Stainless Steel vs. 713.0 Aluminum

EN 1.4410 stainless steel belongs to the iron alloys classification, while 713.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4410 stainless steel and the bottom bar is 713.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 260
74 to 75
Elastic (Young's, Tensile) Modulus, GPa 210
71
Elongation at Break, % 24
3.9 to 4.3
Fatigue Strength, MPa 410
63 to 120
Poisson's Ratio 0.27
0.32
Shear Modulus, GPa 81
27
Shear Strength, MPa 540
180
Tensile Strength: Ultimate (UTS), MPa 850
240 to 260
Tensile Strength: Yield (Proof), MPa 600
170

Thermal Properties

Latent Heat of Fusion, J/g 300
370
Maximum Temperature: Mechanical, °C 1100
180
Melting Completion (Liquidus), °C 1450
630
Melting Onset (Solidus), °C 1400
610
Specific Heat Capacity, J/kg-K 480
860
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
100

Otherwise Unclassified Properties

Base Metal Price, % relative 20
9.5
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 4.0
7.8
Embodied Energy, MJ/kg 56
150
Embodied Water, L/kg 180
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
8.7 to 9.9
Resilience: Unit (Modulus of Resilience), kJ/m3 880
210 to 220
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 30
22 to 23
Strength to Weight: Bending, points 26
28 to 29
Thermal Diffusivity, mm2/s 4.0
57
Thermal Shock Resistance, points 23
10 to 11

Alloy Composition

Aluminum (Al), % 0
87.6 to 92.4
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 24 to 26
0 to 0.35
Copper (Cu), % 0
0.4 to 1.0
Iron (Fe), % 58.1 to 66.8
0 to 1.1
Magnesium (Mg), % 0
0.2 to 0.5
Manganese (Mn), % 0 to 2.0
0 to 0.6
Molybdenum (Mo), % 3.0 to 4.5
0
Nickel (Ni), % 6.0 to 8.0
0 to 0.15
Nitrogen (N), % 0.24 to 0.35
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
0 to 0.25
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
7.0 to 8.0
Residuals, % 0
0 to 0.25