MakeItFrom.com
Menu (ESC)

EN 1.4415 Stainless Steel vs. 2218 Aluminum

EN 1.4415 stainless steel belongs to the iron alloys classification, while 2218 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4415 stainless steel and the bottom bar is 2218 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 17 to 20
6.8 to 10
Fatigue Strength, MPa 470 to 510
110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Shear Strength, MPa 520 to 570
210 to 250
Tensile Strength: Ultimate (UTS), MPa 830 to 930
330 to 430
Tensile Strength: Yield (Proof), MPa 730 to 840
260 to 310

Thermal Properties

Latent Heat of Fusion, J/g 280
390
Maximum Temperature: Mechanical, °C 790
220
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1420
510
Specific Heat Capacity, J/kg-K 470
870
Thermal Conductivity, W/m-K 19
140
Thermal Expansion, µm/m-K 9.9
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
37
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
110

Otherwise Unclassified Properties

Base Metal Price, % relative 13
11
Density, g/cm3 7.9
3.1
Embodied Carbon, kg CO2/kg material 3.6
8.2
Embodied Energy, MJ/kg 51
150
Embodied Water, L/kg 120
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 150 to 160
27 to 31
Resilience: Unit (Modulus of Resilience), kJ/m3 1350 to 1790
450 to 650
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 29 to 33
30 to 39
Strength to Weight: Bending, points 25 to 27
34 to 41
Thermal Diffusivity, mm2/s 5.1
52
Thermal Shock Resistance, points 30 to 34
15 to 19

Alloy Composition

Aluminum (Al), % 0
88.8 to 93.6
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 11.5 to 13.5
0 to 0.1
Copper (Cu), % 0
3.5 to 4.5
Iron (Fe), % 75.9 to 82.4
0 to 1.0
Magnesium (Mg), % 0
1.2 to 1.8
Manganese (Mn), % 0 to 0.5
0 to 0.2
Molybdenum (Mo), % 1.5 to 2.5
0
Nickel (Ni), % 4.5 to 6.5
1.7 to 2.3
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 0.5
0 to 0.9
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0 to 0.010
0
Vanadium (V), % 0.1 to 0.5
0
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15

Comparable Variants