MakeItFrom.com
Menu (ESC)

EN 1.4518 Stainless Steel vs. 5019 Aluminum

EN 1.4518 stainless steel belongs to the iron alloys classification, while 5019 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4518 stainless steel and the bottom bar is 5019 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 34
2.2 to 18
Fatigue Strength, MPa 160
100 to 160
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 79
26
Tensile Strength: Ultimate (UTS), MPa 490
280 to 360
Tensile Strength: Yield (Proof), MPa 210
120 to 300

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1000
180
Melting Completion (Liquidus), °C 1450
640
Melting Onset (Solidus), °C 1400
540
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 12
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.1
29
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
98

Otherwise Unclassified Properties

Base Metal Price, % relative 20
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 4.0
9.0
Embodied Energy, MJ/kg 55
150
Embodied Water, L/kg 160
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
7.6 to 40
Resilience: Unit (Modulus of Resilience), kJ/m3 100
110 to 650
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 17
29 to 38
Strength to Weight: Bending, points 18
35 to 42
Thermal Diffusivity, mm2/s 4.1
52
Thermal Shock Resistance, points 14
13 to 16

Alloy Composition

Aluminum (Al), % 0
91.5 to 95.3
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 18 to 20
0 to 0.2
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 61.4 to 70
0 to 0.5
Magnesium (Mg), % 0
4.5 to 5.6
Manganese (Mn), % 0 to 1.5
0.1 to 0.6
Molybdenum (Mo), % 3.0 to 3.5
0
Nickel (Ni), % 9.0 to 12
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.5
0 to 0.4
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.15