MakeItFrom.com
Menu (ESC)

EN 1.4525 Stainless Steel vs. ISO-WD32260 Magnesium

EN 1.4525 stainless steel belongs to the iron alloys classification, while ISO-WD32260 magnesium belongs to the magnesium alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4525 stainless steel and the bottom bar is ISO-WD32260 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
46
Elongation at Break, % 5.6 to 13
4.5 to 6.0
Fatigue Strength, MPa 480 to 540
150 to 190
Poisson's Ratio 0.28
0.29
Shear Modulus, GPa 76
18
Tensile Strength: Ultimate (UTS), MPa 1030 to 1250
330 to 340
Tensile Strength: Yield (Proof), MPa 840 to 1120
230 to 250

Thermal Properties

Latent Heat of Fusion, J/g 280
330
Maximum Temperature: Mechanical, °C 860
120
Melting Completion (Liquidus), °C 1430
600
Melting Onset (Solidus), °C 1390
520
Specific Heat Capacity, J/kg-K 480
970
Thermal Conductivity, W/m-K 18
110
Thermal Expansion, µm/m-K 11
27

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
28
Electrical Conductivity: Equal Weight (Specific), % IACS 2.6
140

Otherwise Unclassified Properties

Base Metal Price, % relative 13
13
Density, g/cm3 7.8
1.9
Embodied Carbon, kg CO2/kg material 2.8
23
Embodied Energy, MJ/kg 39
160
Embodied Water, L/kg 130
940

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 68 to 130
14 to 19
Resilience: Unit (Modulus of Resilience), kJ/m3 1820 to 3230
560 to 700
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
63
Strength to Weight: Axial, points 36 to 45
48 to 51
Strength to Weight: Bending, points 29 to 33
56 to 58
Thermal Diffusivity, mm2/s 4.7
63
Thermal Shock Resistance, points 34 to 41
19 to 20

Alloy Composition

Carbon (C), % 0 to 0.070
0
Chromium (Cr), % 15 to 17
0
Copper (Cu), % 2.5 to 4.0
0
Iron (Fe), % 70.4 to 79
0
Magnesium (Mg), % 0
92.7 to 94.8
Manganese (Mn), % 0 to 1.0
0
Molybdenum (Mo), % 0 to 0.8
0
Nickel (Ni), % 3.5 to 5.5
0
Niobium (Nb), % 0 to 0.35
0
Nitrogen (N), % 0 to 0.050
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.8
0
Sulfur (S), % 0 to 0.025
0
Zinc (Zn), % 0
4.8 to 6.2
Zirconium (Zr), % 0
0.45 to 0.8
Residuals, % 0
0 to 0.3

Comparable Variants