MakeItFrom.com
Menu (ESC)

EN 1.4547 Stainless Steel vs. 5059 Aluminum

EN 1.4547 stainless steel belongs to the iron alloys classification, while 5059 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4547 stainless steel and the bottom bar is 5059 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 39
11 to 25
Fatigue Strength, MPa 290
170 to 240
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 80
26
Shear Strength, MPa 510
220 to 250
Tensile Strength: Ultimate (UTS), MPa 750
350 to 410
Tensile Strength: Yield (Proof), MPa 340
170 to 300

Thermal Properties

Latent Heat of Fusion, J/g 300
390
Maximum Temperature: Corrosion, °C 420
65
Maximum Temperature: Mechanical, °C 1090
210
Melting Completion (Liquidus), °C 1470
650
Melting Onset (Solidus), °C 1420
510
Specific Heat Capacity, J/kg-K 460
900
Thermal Conductivity, W/m-K 14
110
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.0
29
Electrical Conductivity: Equal Weight (Specific), % IACS 2.3
95

Otherwise Unclassified Properties

Base Metal Price, % relative 28
9.5
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 5.6
9.1
Embodied Energy, MJ/kg 75
160
Embodied Water, L/kg 190
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 240
42 to 75
Resilience: Unit (Modulus of Resilience), kJ/m3 290
220 to 650
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 26
36 to 42
Strength to Weight: Bending, points 23
41 to 45
Thermal Diffusivity, mm2/s 3.8
44
Thermal Shock Resistance, points 16
16 to 18

Alloy Composition

Aluminum (Al), % 0
89.9 to 94
Carbon (C), % 0 to 0.020
0
Chromium (Cr), % 19.5 to 20.5
0 to 0.25
Copper (Cu), % 0.5 to 1.0
0 to 0.25
Iron (Fe), % 51 to 56.3
0 to 0.5
Magnesium (Mg), % 0
5.0 to 6.0
Manganese (Mn), % 0 to 1.0
0.6 to 1.2
Molybdenum (Mo), % 6.0 to 7.0
0
Nickel (Ni), % 17.5 to 18.5
0
Nitrogen (N), % 0.18 to 0.25
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.7
0 to 0.45
Sulfur (S), % 0 to 0.010
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0.4 to 0.9
Zirconium (Zr), % 0
0.050 to 0.25
Residuals, % 0
0 to 0.15