MakeItFrom.com
Menu (ESC)

EN 1.4618 Stainless Steel vs. B443.0 Aluminum

EN 1.4618 stainless steel belongs to the iron alloys classification, while B443.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4618 stainless steel and the bottom bar is B443.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 200 to 210
43
Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 51
4.9
Fatigue Strength, MPa 240 to 250
55
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 480 to 500
110
Tensile Strength: Ultimate (UTS), MPa 680 to 700
150
Tensile Strength: Yield (Proof), MPa 250 to 260
50

Thermal Properties

Latent Heat of Fusion, J/g 280
470
Maximum Temperature: Mechanical, °C 900
170
Melting Completion (Liquidus), °C 1400
620
Melting Onset (Solidus), °C 1360
600
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 16
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
38
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
130

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.7
8.0
Embodied Energy, MJ/kg 39
150
Embodied Water, L/kg 150
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 270 to 280
5.6
Resilience: Unit (Modulus of Resilience), kJ/m3 160 to 170
18
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
52
Strength to Weight: Axial, points 24 to 25
15
Strength to Weight: Bending, points 22 to 23
23
Thermal Diffusivity, mm2/s 4.0
61
Thermal Shock Resistance, points 15 to 16
6.8

Alloy Composition

Aluminum (Al), % 0
91.9 to 95.5
Carbon (C), % 0 to 0.1
0
Chromium (Cr), % 16.5 to 18.5
0
Copper (Cu), % 1.0 to 2.5
0 to 0.15
Iron (Fe), % 62.7 to 72.5
0 to 0.8
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 5.5 to 9.5
0 to 0.35
Nickel (Ni), % 4.5 to 5.5
0
Nitrogen (N), % 0 to 0.15
0
Phosphorus (P), % 0 to 0.070
0
Silicon (Si), % 0 to 1.0
4.5 to 6.0
Sulfur (S), % 0 to 0.010
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15