MakeItFrom.com
Menu (ESC)

EN 1.4630 Stainless Steel vs. 5383 Aluminum

EN 1.4630 stainless steel belongs to the iron alloys classification, while 5383 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4630 stainless steel and the bottom bar is 5383 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 23
6.7 to 15
Fatigue Strength, MPa 170
130 to 200
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 300
190 to 220
Tensile Strength: Ultimate (UTS), MPa 480
310 to 370
Tensile Strength: Yield (Proof), MPa 250
150 to 310

Thermal Properties

Latent Heat of Fusion, J/g 290
390
Maximum Temperature: Corrosion, °C 520
65
Maximum Temperature: Mechanical, °C 800
200
Melting Completion (Liquidus), °C 1440
650
Melting Onset (Solidus), °C 1390
540
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 28
130
Thermal Expansion, µm/m-K 10
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.8
29
Electrical Conductivity: Equal Weight (Specific), % IACS 3.3
97

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.5
9.0
Embodied Energy, MJ/kg 36
160
Embodied Water, L/kg 120
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 92
23 to 40
Resilience: Unit (Modulus of Resilience), kJ/m3 160
170 to 690
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 17
32 to 38
Strength to Weight: Bending, points 18
38 to 42
Thermal Diffusivity, mm2/s 7.5
51
Thermal Shock Resistance, points 17
14 to 16

Alloy Composition

Aluminum (Al), % 0 to 1.5
92 to 95.3
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 13 to 16
0 to 0.25
Copper (Cu), % 0 to 0.5
0 to 0.2
Iron (Fe), % 77.1 to 86.7
0 to 0.25
Magnesium (Mg), % 0
4.0 to 5.2
Manganese (Mn), % 0 to 1.0
0.7 to 1.0
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 0 to 0.5
0
Niobium (Nb), % 0 to 0.5
0
Phosphorus (P), % 0 to 0.050
0
Silicon (Si), % 0.2 to 1.5
0 to 0.25
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0.15 to 0.8
0 to 0.15
Zinc (Zn), % 0
0 to 0.4
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15