MakeItFrom.com
Menu (ESC)

EN 1.4634 Stainless Steel vs. 1070 Aluminum

EN 1.4634 stainless steel belongs to the iron alloys classification, while 1070 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4634 stainless steel and the bottom bar is 1070 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 21
4.5 to 39
Fatigue Strength, MPa 180
22 to 49
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 340
48 to 79
Tensile Strength: Ultimate (UTS), MPa 540
73 to 140
Tensile Strength: Yield (Proof), MPa 280
17 to 120

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 900
170
Melting Completion (Liquidus), °C 1430
640
Melting Onset (Solidus), °C 1390
640
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 21
230
Thermal Expansion, µm/m-K 10
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.5
61
Electrical Conductivity: Equal Weight (Specific), % IACS 3.0
200

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.9
8.3
Embodied Energy, MJ/kg 42
160
Embodied Water, L/kg 140
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 93
4.8 to 21
Resilience: Unit (Modulus of Resilience), kJ/m3 200
2.1 to 110
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 20
7.5 to 14
Strength to Weight: Bending, points 19
14 to 22
Thermal Diffusivity, mm2/s 5.8
94
Thermal Shock Resistance, points 19
3.3 to 6.1

Alloy Composition

Aluminum (Al), % 0.2 to 1.5
99.7 to 100
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 17.5 to 18.5
0
Copper (Cu), % 0 to 0.5
0 to 0.040
Iron (Fe), % 74.9 to 81.8
0 to 0.25
Magnesium (Mg), % 0
0 to 0.030
Manganese (Mn), % 0 to 1.0
0 to 0.030
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 0 to 0.5
0
Niobium (Nb), % 0.3 to 1.0
0
Phosphorus (P), % 0 to 0.050
0
Silicon (Si), % 0.2 to 1.5
0 to 0.2
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0
0 to 0.030
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.040
Residuals, % 0
0 to 0.030