MakeItFrom.com
Menu (ESC)

EN 1.4659 Stainless Steel vs. EN AC-46000 Aluminum

EN 1.4659 stainless steel belongs to the iron alloys classification, while EN AC-46000 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4659 stainless steel and the bottom bar is EN AC-46000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 260
91
Elastic (Young's, Tensile) Modulus, GPa 210
73
Elongation at Break, % 49
1.0
Fatigue Strength, MPa 460
110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 81
28
Tensile Strength: Ultimate (UTS), MPa 900
270
Tensile Strength: Yield (Proof), MPa 480
160

Thermal Properties

Latent Heat of Fusion, J/g 300
530
Maximum Temperature: Mechanical, °C 1100
180
Melting Completion (Liquidus), °C 1480
620
Melting Onset (Solidus), °C 1430
530
Specific Heat Capacity, J/kg-K 460
880
Thermal Conductivity, W/m-K 12
100
Thermal Expansion, µm/m-K 16
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
26
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
82

Otherwise Unclassified Properties

Base Metal Price, % relative 37
10
Density, g/cm3 8.2
2.8
Embodied Carbon, kg CO2/kg material 6.5
7.6
Embodied Energy, MJ/kg 89
140
Embodied Water, L/kg 220
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 370
2.3
Resilience: Unit (Modulus of Resilience), kJ/m3 550
170
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
49
Strength to Weight: Axial, points 31
26
Strength to Weight: Bending, points 25
33
Thermal Diffusivity, mm2/s 3.2
42
Thermal Shock Resistance, points 19
12

Alloy Composition

Aluminum (Al), % 0
79.7 to 90
Carbon (C), % 0 to 0.020
0
Chromium (Cr), % 23 to 25
0 to 0.15
Copper (Cu), % 1.0 to 2.0
2.0 to 4.0
Iron (Fe), % 35.7 to 45.7
0 to 1.3
Lead (Pb), % 0
0 to 0.35
Magnesium (Mg), % 0
0.050 to 0.55
Manganese (Mn), % 2.0 to 4.0
0 to 0.55
Molybdenum (Mo), % 5.5 to 6.5
0
Nickel (Ni), % 21 to 23
0 to 0.55
Nitrogen (N), % 0.35 to 0.5
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.7
8.0 to 11
Sulfur (S), % 0 to 0.010
0
Tin (Sn), % 0
0 to 0.15
Titanium (Ti), % 0
0 to 0.25
Tungsten (W), % 1.5 to 2.5
0
Zinc (Zn), % 0
0 to 1.2
Residuals, % 0
0 to 0.25