MakeItFrom.com
Menu (ESC)

EN 1.4669 Stainless Steel vs. 336.0 Aluminum

EN 1.4669 stainless steel belongs to the iron alloys classification, while 336.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4669 stainless steel and the bottom bar is 336.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 260
110 to 130
Elastic (Young's, Tensile) Modulus, GPa 200
75
Elongation at Break, % 28
0.5
Fatigue Strength, MPa 330
80 to 93
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 78
28
Shear Strength, MPa 500
190 to 250
Tensile Strength: Ultimate (UTS), MPa 780
250 to 320
Tensile Strength: Yield (Proof), MPa 450
190 to 300

Thermal Properties

Latent Heat of Fusion, J/g 290
570
Maximum Temperature: Mechanical, °C 1030
210
Melting Completion (Liquidus), °C 1420
570
Melting Onset (Solidus), °C 1370
540
Specific Heat Capacity, J/kg-K 480
890
Thermal Conductivity, W/m-K 15
120
Thermal Expansion, µm/m-K 13
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
29
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
95

Otherwise Unclassified Properties

Base Metal Price, % relative 13
11
Density, g/cm3 7.7
2.8
Embodied Carbon, kg CO2/kg material 2.6
7.9
Embodied Energy, MJ/kg 38
140
Embodied Water, L/kg 160
1010

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 190
1.1 to 1.6
Resilience: Unit (Modulus of Resilience), kJ/m3 510
250 to 580
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 28
25 to 32
Strength to Weight: Bending, points 24
32 to 38
Thermal Diffusivity, mm2/s 4.0
48
Thermal Shock Resistance, points 21
12 to 16

Alloy Composition

Aluminum (Al), % 0
79.1 to 85.8
Carbon (C), % 0 to 0.045
0
Chromium (Cr), % 21.5 to 24
0
Copper (Cu), % 1.6 to 3.0
0.5 to 1.5
Iron (Fe), % 65.2 to 74.8
0 to 1.2
Magnesium (Mg), % 0
0.7 to 1.3
Manganese (Mn), % 1.0 to 3.0
0 to 0.35
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 1.0 to 3.0
2.0 to 3.0
Nitrogen (N), % 0.12 to 0.2
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
11 to 13
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35