MakeItFrom.com
Menu (ESC)

EN 1.4669 Stainless Steel vs. A360.0 Aluminum

EN 1.4669 stainless steel belongs to the iron alloys classification, while A360.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4669 stainless steel and the bottom bar is A360.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 260
75
Elastic (Young's, Tensile) Modulus, GPa 200
72
Elongation at Break, % 28
1.6 to 5.0
Fatigue Strength, MPa 330
82 to 150
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 78
27
Shear Strength, MPa 500
180
Tensile Strength: Ultimate (UTS), MPa 780
180 to 320
Tensile Strength: Yield (Proof), MPa 450
170 to 260

Thermal Properties

Latent Heat of Fusion, J/g 290
530
Maximum Temperature: Mechanical, °C 1030
170
Melting Completion (Liquidus), °C 1420
680
Melting Onset (Solidus), °C 1370
590
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
110
Thermal Expansion, µm/m-K 13
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
30
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
100

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.5
Density, g/cm3 7.7
2.6
Embodied Carbon, kg CO2/kg material 2.6
7.8
Embodied Energy, MJ/kg 38
150
Embodied Water, L/kg 160
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 190
4.6 to 13
Resilience: Unit (Modulus of Resilience), kJ/m3 510
190 to 470
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
53
Strength to Weight: Axial, points 28
19 to 34
Strength to Weight: Bending, points 24
27 to 39
Thermal Diffusivity, mm2/s 4.0
48
Thermal Shock Resistance, points 21
8.5 to 15

Alloy Composition

Aluminum (Al), % 0
85.8 to 90.6
Carbon (C), % 0 to 0.045
0
Chromium (Cr), % 21.5 to 24
0
Copper (Cu), % 1.6 to 3.0
0 to 0.6
Iron (Fe), % 65.2 to 74.8
0 to 1.3
Magnesium (Mg), % 0
0.4 to 0.6
Manganese (Mn), % 1.0 to 3.0
0 to 0.35
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 1.0 to 3.0
0 to 0.5
Nitrogen (N), % 0.12 to 0.2
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
9.0 to 10
Sulfur (S), % 0 to 0.030
0
Tin (Sn), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.25